Are you planning to clean the windows for the upcoming holiday season? Or do you want to boost your home’s aesthetic appearance? Whatever the reason, you need a step-by-step guide first.
So, how do you clean windows? You need enough time to complete the cleaning satisfactorily. Initially, you need to wipe out the extra dust, then apply the cleaning solution to the glass. Scrub the window surface gently, then rinse and dry the area to finish the process.
But the first step is to find the necessary supplies for the cleaning process. Let’s check out what you need and how you can complete the process.
How to Clean Windows: Step-by-Step Process
Cleaning your home windows can be time-consuming, but cleaning is relatively easy and will increase your home’s beauty. Here’s the step-by-step guide to how to clean windows easily:
Step 1: Collect Supplies
To make cleaning easier, your first step should be gathering all the necessary equipment. Here’s the list of supplies you need for the further process:
- Newspaper or old towels to cover the floor or ground
- A bucket of lukewarm water mixed with a few drops of mild dish soap
- Glass cleaner spray
- Squeegee or lint-free cloth
- Vinegar to buff the glass
- Step stool or magnetic squeezer (if needed)
- Rubber gloves (optional)
Step 2: Prepare the Window Area
Once you have the supplies, prepare the window area with newspaper or towels below to catch drips. If the window is movable, open it slightly so fresh air circulates as you clean.
Lay out cleaning supplies on the newspaper or towels within easy reach. At this stage, put on rubber gloves to protect your hands.
Step 3: Wipe the Window
Before you spray the cleaning agent on the glass or track, wipe the area to remove extra dust for ease.
If there is dust and you spray water, the area may become muddy and tricky to clean. Therefore, wipe the entire window with a cloth before washing.
Step 4: Wash the Window
Spray on a small section of the window with the glass cleaner solution. Use a circular motion with a sponge or microfiber cloth to remove any dust or dirt buildup from the window.
What if the dirt or stain doesn’t to come off?
Spray a white vinegar solution and leave it for at least 5 minutes before gently scrubbing the area. If you apply too much pressure while scrubbing the dirt or stain away, you may break the glass or hardware.
Wipe the soapy solution from the glass in vertical and horizontal strokes to prevent streaking.
Work on one small section at a time and repeatedly wipe with the clean side of the cloth to ensure the window is free of residues. For better results, you can use the squeezer in this step.
If the window is hard to reach, climb the step stool to access it. If you can’t reach the outside of the window physically, use a magnetic squeegee to clean it from the inside.
Step 5: Rinse the Window
Once all surfaces have been scrubbed and wiped, it’s time to rinse away any remaining cleaner and dirt residues. Fill your bucket with fresh, lukewarm water.
Use the wet squeegee or cloth to rinse sections of the window, moving from top to bottom. Rinse each part of the window thoroughly until no soap film remains.
Dry water stains can cause unwanted spots, so rinse well. Wring out the squeegee or cloth frequently in the rinse water.
Step 6: Clean Window Screens and Tracks
After you rinse and wipe the excess water from the glass, move on to clean the window screens and tracks.
This way, you can reduce the risk of getting water spots on your window glass.
Now, remove the screens and scrub them gently with soapy water, then rinse and let them dry properly before reinstalling.
To clean the tracks, you can use a vacuum or brush to clean, then wipe them down with a damp cloth.
Step 7: Let the Window Dry
With all residues rinsed away and other parts cleaned, it’s time to dry the window.
Wipe away excess water from the squeegee before sliding it along interior surfaces from top to bottom in steady and straight strokes.
Alternatively, use a dry, lint-free cloth to thoroughly wipe away any traces of moisture to make sure there are zero water spots.
In short, you’ll need to wipe the window up to three times throughout the cleaning process.
Step 8: Polish the Glass
For a brilliant shine, spray glass cleaner or vinegar solution onto the glass and buff it with a clean, dry cloth. This step eliminates any remaining streaks and enhances the clarity of your windows. You may also follow this polishing technique weekly.
Conclusion
So, how do you clean windows in your home? First, gather the equipment, wipe the excess dust, wash, rinse, and dry. These are pretty simple steps to successfully clean windows without causing any water stains.
Once you are done cleaning, give a final inspection to see if any area needs more cleaning or wiping. Regular window cleaning will improve your house’s look and ensure a clear view of the outdoors.
FAQs
Here are some common questions you may have regarding the process of cleaning windows:
Q: How often should I clean windows?
Most homeowners clean windows 2-4 times per year, such as in spring, summer, fall, and before winter. High-traffic areas may need monthly cleaning.
Q: What’s the best way to remove hard water spots on windows?
Mix 1 part white vinegar with 8 parts water and wipe onto spots with a microfiber cloth. Rinse afterward to avoid streaks. Commercial spot removers also work well.
Q: Can I leave cleaner or water on the windowsills?
No, it’s best to thoroughly dry all surfaces and remove any residue that could damage wood, attract bugs, or cause streaks. Open windows after to allow any remaining moisture to air dry fully.
